Is your Netgear router WiFi signals affected by the devices active nearby? Are you unable to complete the Netgear Genie download process due to poor performance of your router? If yes, then you are on the right post. Here, we will make you familiar with some of the best tactics that can enhance the performance of your Netgear router up to 30%. Let’s begin!
Choose A Different Place For Your Netgear Router
Have you placed your router inside a cabinet, near to thick walls, windows, corners or back of anything? If so, then it’s high time to relocate it. The best location to place your Netgear router is the center location of the house near to modem. Also, it is recommended to place your Netgear device on a higher surface but not too close to roof.
Try this out and let us know whether this troubleshooting tip has helped you out in enhancing your Netgear router’s performance or not.
Do Not Place Your Netgear Router and Modem too Closer
Placing your Netgear router and modem in close proximity is a very good idea. But, placing them too closer can affect their WiFi signals. So, it is advised to place your devices in the limit of 20-30 feet. But, do not place at a distance more than 50 feet.
Keep Your Router Up-to-date
Updating Netgear router firmware is one of the best ways to enhance its WiFi performance. Updating the firmware of your router to the latest version will not only improve its overall performance, functionality, and stability but also provide you improved security and extra advance features to enjoy.
Do Not Use Over-Crowded Channels
Chances are that your router is operating on overloaded or overcrowded channels, resulting in poor connectivity. It has been proved that channels 1, 6, and 11 are less-crowded and best for your Netgear router. So, in order to perk up your router’s performance, access the Netgear router login page and select the best channel for it.
Kick off Freeloaders
To improve your Netgear router performance, we suggest changing the default routerlogin credentials soon after configuring it. Bear in mind that the default Netgear router login details are very easily cracked. So, it’s better to change them in order to keep your device safe from freeloaders. Doing so will somehow enhance your Netgear router performance.
Configure Your Netgear Router Properly
Chances are that you haven’t configured your Netgear router properly and this can be the reason behind poor performance of the device. So, to get the most out of your Netgear router, ensure to set it up properly. Simply access the Netgear Genie setup wizard using default routerlogin credentials (unless changed), follow the onscreen instructions and configure your device in a fly.
Enable the Guest Access Network Feature
On the off chance if you haven’t enabled the guest access network feature yet, it is suggested – without much delay – open the Netgear Genie app (only if installed) and enable the feature. Doing so will permit only a number of devices to access your network whom you allow. Enable the feature and enhance the performance of your Netgear router.
Power Cycle Your Netgear Router
Possibilities are – your Netgear router is overheated and due to this it is performing slow. So, to boost it up, give in a rest by power cycling it. Doing so, will also help you fix many big Netgear router technical glitches. To initiate the process, do the following:
- Disconnect your modem and Netgear router.
- Unplug your Netgear router.
- You have to wait for at least 20 minutes.
- Then, plug the device back in again.
- Allow the LEDs on your Netgear router to become stable.
Fab! The performance of your Netgear router has been improved by simple rebooting, hasn’t it? If yes, then let us know via comments. And, if you need more help to improve the performance of your Netgear router, please let us know.