Different LED lights on your Netgear Orbi router signify how well it’s functioning. However, if the LED on your wireless device is blinking purple, then you are in some serious trouble. But, fret not because we are here to assist you. In this article, you’ll find some of the best troubleshooting tips that will definitely help you get rid of the Netgear Orbi purple light issue in a matter of minutes. So, scroll down and read on.
But, before you learn how to troubleshoot the issue, let’s first shed light on the reasons that might have led you to it. Here are some of the most common factors contributing to the Orbi purple light issue:
- You haven’t performed Netgear Orbi firmware update timely.
- The Ethernet connection between your router and the existing modem is loose.
- There is some issue with the hardware of your Orbi device.
- The space between your Netgear Orbi router and the modem is too much.
- Technical glitches can also force you to face the Orbi purple light issue.
Now that you know why you’re experiencing the Netgear Orbi purple light issue, follow the troubleshooting tips mentioned below to fix it.
Fixed: Netgear Orbi Purple Light Issue
- Reboot Your Netgear Orbi
Start by rebooting your Netgear Orbi router. Yes, it is the simplest thing to do but it works in most cases. In order to reboot your Netgear Orbi router, here’s what you need to do:
- Power off your Orbi wireless router and unplug it from the wall outlet.
- Wait for some time.
- Thereafter, plug your Orbi router back into the wall socket and turn it on.
Now, check whether you are able to get rid of the Netgear Orbi purple light issue or not. If not, continue reading this post.
- Perform Orbi Firmware Update
Updating the firmware of the Orbi helps in fixing bugs and technical issues. Also, it enhances the overall performance of your wireless device. Considering performing Netgear Orbi firmware update does so much, chances are that it might resolve the purple light issue for you. Thus, wait no more, access orbilogin.net and update the firmware of your Orbi to the latest version right away.
- Check the Ethernet Connection
Looks like the Ethernet connection between your Netgear Orbi router and the existing modem is not stable. That might be because the Ethernet cable you’ve used is either worn out or damaged.
To troubleshoot the issue, it is recommended that you either tape up your current Ethernet cable or connect your WiFi devices using a brand new one.
- Bring Your WiFi Devices Closer
Apart from the Ethernet connection, if the distance between your Netgear Orbi router and the existing modem is too much, that too can lead you to the purple light issue. Thus, make sure that both your devices are placed in close proximity.
Additionally, avoid placing your devices in corners or near thick concrete walls.
If even after following the troubleshooting tips mentioned above, you’re facing the Netgear Orbi purple light issue, then, it’s high time you perform factory default reset. Here’s how:
How to Perform Netgear Orbi Factory Default Reset?
These guidelines will help you reset your Netgear Orbi wireless device:
- Look for the Reset button located on your Netgear Orbi wireless device.
- Once found, press it carefully using an oil pin.
- Then, wait for some time.
As soon as you are done resetting your Netgear Orbi device to the factory default mode, access the Netgear Orbi login page and reconfigure your device.
The Bottom Line
Our guide to troubleshoot the Netgear Orbi purple light issue comes to an end here. We hope that the tips mentioned in this post helped you get rid of the blinking purple LED. If they did, do leave a word of appreciation in the comments section.